MARTINI's Atem Statistics
How long was each camera actually on air?
MARTINI's Atem Statistics reads your Blackmagic ATEM live and turns it into airtime and cuts statistics per camera – per M/E individually and as a global overview. Ideal for documentation, client reports and on-air graphics.
Free 30-minute demo mode, once daily – no purchase needed to try it out.
Who got how much airtime?
These are exactly the questions MARTINI's Atem Statistics was built to answer.
No overview of camera airtime
After the show, nobody knows exactly how long each camera was on program. MARTINI's Atem Statistics captures it live and makes it visible instantly.
Multiple M/Es are hard to compare
On ATEM systems with several M/E buses (e.g. Constellation 8K), each M/E runs its own production. The app tracks every M/E individually and also combines everything into one global statistic.
No documentation for clients
Producers or clients ask for proof of how airtime was distributed. One click saves the complete production statistics as a PDF – a global page, a comparison overview of all M/Es, and a detail page per M/E.
No on-air graphic for statistics
Showing airtime numbers live on air or on a production monitor is a hassle without extra software. Two ready-made greenscreen windows solve that directly.
One app. ATEM to statistics.
The app only listens in – it never touches your program/preview signal, and runs alongside your existing production on a computer in your production network.
The app connects to your Blackmagic ATEM over the network, continuously reads the program tally of all four M/Es, and calculates airtime and cuts per camera from it – live, per M/E and combined into a global view.
Everything around production statistics
Everything listed below is included in the current version of the app.
Production statistics, saved as a PDF
Know exactly how much airtime each camera had – on every M/E and overall – and keep proof of it.
Airtime & cuts per camera, live
While the app runs, it continuously tracks how long each camera was on program (airtime) and how often it was cut to – live, in a table and pie charts inside the app.
Per M/E and global
Tabs let you switch between the statistics of each individual M/E (M/E 1–4) and the global view that combines all of them.
PDF export with a full overview
A single button saves the production statistics as a PDF in the Downloads folder: a global page, a comparison overview of all M/Es, and a detail page for every M/E that has data.
Can also be triggered externally
The same export can be triggered with a single UDP command (savestats) from outside the app – handy for saving a snapshot during a live show.
Chroma-key-ready statistics graphics
Two separate output windows run on a pure green background – ready to key directly into your switcher.
Statistics ticker
A scrolling banner shows airtime and cut percentages per camera on a pure green background – ready to key onto a production monitor or an on-air graphic.
Statistics window
A second window with a green background shows the same data as pie charts – for a more detailed view, also chroma-key-ready.
M/E selectable directly in the window
In both windows, moving the mouse to the top-right corner reveals a selector to switch between Global and M/E 1–4 – live, without reloading.
Size, speed & position
Font size, scroll speed and position of the ticker, plus size and screen corner of the statistics window, are configured directly in the app – an already-open window picks up changes automatically.
Network control via UDP
Start, stop and statistics management are also available as simple network commands – triggerable from outside the app, e.g. from a show control system.
Simple UDP text commands
The app listens on the network for simple UDP text commands: start/stop for the capture, resetstats to reset, and savestats to save the production statistics as a PDF.
Fits into existing show control
Since these are standard UDP commands, they can be triggered by any tool that can send UDP packets – including an Elgato Stream Deck with a UDP-sending action/plugin.
Configurable network access
You decide whether commands are only accepted from this computer (127.0.0.1) or from any device on the network (0.0.0.0), and on which port.
Runs alongside your tally system
MARTINI's Atem Statistics never touches your tally setup – it only listens in. It runs fine alongside MARTINI's Atem Hollyland Bridge on the same computer.
Built for Blackmagic ATEM workflows with multiple M/Es
MARTINI's Atem Statistics is built for Blackmagic ATEM systems where production statistics across several M/E buses matter.
Tested and used with the Blackmagic ATEM Constellation 8K as a concrete example of a multi-M/E system. The underlying ATEM protocol support is not limited to a single model – other Blackmagic ATEM systems with multiple M/E buses are equally within the app's intended use. If you're unsure whether your specific ATEM model is supported, try the free demo mode first or get in touch before buying a license.
Try before you buy
Try MARTINI's Atem Statistics in demo mode before buying a license: a free 30-minute demo session, available once a day, no purchase required.
Buy a license
Order summary
- Price: – per month or – per year – each including statutory VAT
- Billing interval: monthly or yearly, depending on the option selected above
- Contract term: one billing period each (1 month or 1 year)
- Automatic renewal: Yes, until cancelled – see Terms
- Cancellation: anytime, effective at the end of the current period, directly via PayPal or via the cancellation link/page
- Payment method: PayPal (recurring payment)
- Service: right to use the software for the duration of the subscription, including activation and updates
Frequently asked questions
What exactly does MARTINI's Atem Statistics do?
The app reads your Blackmagic ATEM's program tally live and calculates how long each camera was on program (airtime) and how often it was cut to – per M/E (1–4) individually and as a global overview.
Does the app touch my ATEM signal or tally system?
No. The app only listens in and does not output any video or tally signal. It runs fine alongside your existing setup, including alongside MARTINI's Atem Hollyland Bridge.
Does it support multiple M/Es?
Yes. All four M/E buses are evaluated simultaneously. In the app, tabs let you switch between each individual M/E's statistics and the global view.
Does it work with the ATEM Constellation 8K?
Yes, the ATEM Constellation 8K is used and tested as a concrete example of a multi-M/E ATEM system. Other Blackmagic ATEM systems with multiple M/E buses are equally within the app's intended use.
How do I get the statistics as a document?
The "Save statistics as PDF" button (or the UDP command savestats) writes a PDF into the Downloads folder: a global page, a comparison overview of all M/Es, and a detail page for every M/E with data.
Can I show the statistics on air or on a monitor?
Yes. Two separate windows (ticker and pie-chart window) run on a pure green background and can be keyed into any switcher via chroma key.
Can I show a specific M/E instead of the global statistics in these windows?
Yes, directly in the window: move the mouse to the top-right corner to reveal the selector and switch between Global and M/E 1–4.
Do I need additional hardware?
No. You only need a computer on the same network as your Blackmagic ATEM to run the app.
Is there a demo version?
Yes. The app includes a free 30-minute demo mode, available once a day, so you can try it before buying a license.
Does it support network control / Stream Deck?
The app can be controlled over the network via simple UDP text commands (start/stop, reset statistics, save PDF). That means it can be triggered by external show control tools, including Stream Deck setups that can send UDP commands.
What's the difference to MARTINI's Atem Hollyland Bridge?
The Atem Hollyland Bridge sends tally signals to the Hollyland Wireless Tally System. MARTINI's Atem Statistics has no tally output at all – it's a pure statistics tool for airtime and cuts, usable independently of a tally system or alongside one.